Showing 97–112 of 731 results
DeWalt DCD996P2-QW
Type: Cordless Hammer Drill
Voltage: 18V
Battery Type: Li-Ion
Battery Capacity: 5.0Ah
Chuck Type: 13mm Keyless
Max Torque: 95Nm
Speed Settings: 3
Impact Rate: 0-38,250 BPM
Max Drilling Capacity: 13mm (Concrete)
LED Light: Yes
DeWalt DCE079D1G-QW
Laser Type: Green Laser
Power Source: 12V XR Battery
Range: Up to 30 meters
Accuracy: ?0.3 mm/m
Self-Levelling: Yes
Mounting: Magnetic bracket included
IP Rating: IP54 (Dust and water-resistant)
Battery: 1 x 12V XR Li-ion
Charging Time: Approx. 1 hour
Included Accessories: Laser level, battery, charger, magnetic bracket
DeWalt DCE089D1G-QW
Beam Color: Green
Laser Class: Class 2
Accuracy: ? 0.3 mm @ 10m
Range: Up to 30m (with receiver)
Power Source: 12V Li-Ion Battery
Durability: IP54 Rating
DeWalt DCE089D1R-QW
Self-Leveling within ?4?
Range: 30 meters (50 meters with detector)
Accuracy: ?0.3 mm/m
Laser Class 2
IP54 rating for dust and water protection
DeWalt DCF620D2K-QW
Voltage: 18V
Battery: 2 x 2.0Ah Li-ion
Max Torque: 30 Nm
No-load speed: 0-4400 RPM
Bit holder: 6.35 mm (1/4″)
Tool-free depth adjustment
LED light for visibility in dark workspaces
DeWalt DCF887N-XJ
Type: Impact Driver
Voltage: 18V
Max Torque: 205 Nm
No Load Speed: 0-2800 RPM
Impacts per Minute: 0-3800 IPM
Tool Length: 137 mm
Chuck Size: 1/4″ Hex
LED Light: Yes, with delay
Belt Hook: Yes
DeWalt DCF894N-XJ
Voltage: 18V
Max Torque: 447 Nm
No Load Speed: 0-2000 RPM
Impacts Per Minute: 0-2700 IPM
Brushless Motor
LED Work Light
1/2″ Anvil with Detent Pin
DeWalt DCF894P2-QW
Voltage: 18V
Max Torque: 447 Nm
Battery: 5.0 Ah XR Li-ion
Drive Size: 1/2″ square
Motor Type: Brushless
DeWalt DCF899P2-QW
Voltage: 18V
Max Torque: 950 Nm
Max Bolt Diameter: M20
No Load Speed: 0-400/1200/1900 rpm
Impact Rate: 0-2400/2700/3300 ipm
Brushless Motor
LED Work Light
DeWalt DCG405N-XJ
Voltage: 18V
Motor Type: Brushless
Disc Size: 125 mm
No Load Speed: 9,000 rpm
Weight: 2.6 kg
Power Output: 850W
Spindle Thread: M14
DeWalt DCH172E2T-QW
12V, 1.4 Joules impact energy, 4.3m/s? vibration, SDS-Plus chuck, Brushless motor
DeWalt DCH263N-XJ
Voltage: 18V
Impact Energy: 2.6 J
Blows per Minute: 0-4,200 bpm
No Load Speed: 0-1,500 rpm
Tool Holder: SDS+
Battery: Not Included
Hammering Function: Yes
Rotation Function: Yes
Drilling Capacity: Concrete: 26 mm
Vibration Control: Yes
DeWalt DCM565N-XJ
Voltage: 18V XR
Motor: Brushless
Bar Length: 30 cm
Oil Capacity: 120 ml
Chain Speed: 7.68 m/s
Tool-free bar fitment
Auto oiling system